- Phone：
- 0086-13506565739
- Tel：
- 0086-577-66851569
- E-mail：
- 75156449@qq.com
- Address：
- Songjiadai Industrial Estate,Feiyun Town,Ruian City,Wenzhou,Zhejiang,China
Features
The HSR Serial unit flexo presses is our newest machine which aimed to produce high quality label with high speed and IML label function . the large 1050mm unwinding with servo motor keeps the roller running stable and auto stop on the end .
This machine compact size and short web path keeps wastage of material
The full machine adopt all servo motor , there all total 25 pcs servo motor , unwinding unit , rewinding unit ,two nipping roller ,8 set of printing unit ,2 set of die cutting unit ,matrix rewinding unit which keep the tension of film or paper smoothly and stable.
|
Max.Web width |
350/460/530/670mm |
|
Max.Printing width |
340/450/520/660mm |
|
Max.Unwind Diameter |
1050mm |
|
Max.Rewind Diameter |
1050mm |
|
Max.printing speed |
200m/min |
|
Printing Precision accuracy |
|
|
Rang of printing |
9.5”-24” |
|
Max.label die cutting speed |
150m/min |
|
Pre –registration |
Semi |
|
Auto registration |
Servo motor with color sensor |
|
Material |
All Paper material ,Aluminum material ,unsupport film and shrink |
|
Thickness of material |
0.02mm—0.35mm |
|
Power |
380V 50/60HZ |
|
Air Supply |
0.8KPA |
|
60A |
|
|
Machine Weight |
About 10000KG depend on quantity of unit |
|
Start machine power |
|
|
high speed power |
|
UNWINDING UNIT
? Maximum diameter of unwinding is 1050mm adopt pneumatic cylinder for loading and unloading
? Air expanding shaft for 3 "
? Servo motor for unwinding
? Paper cutting platform for pneumatic clamping paper
? Electronic Web aligner for accurate alignment of the Web (BST German)
? Pneumatic components adopted by Airtac
? Corona device effectively increases the amount of ink on film （optional)
? Removing static electricity from material surface with electrostatic device（optional)
? Dust removal from the surface of raw material with dust removal device（optional)
SPLICE TABLE (ON WEB GUIDING)
? Pneumatic controls splice table for east splicing and web jointing
? Individual pneumatic controls for each splice bar
? Splice table with cutter support slot
Nipping driver
? Servo driver controls the infeed and out with auto tension for accurate tension of substrate into printing
? The nipping roller works with pneumatic cylinder and PU roller
Printing unit
? Wide range from 10” to 24” of plate roller
? Teflon technology for ink tray which is easy to clean ,ink roller ,impression roller with tolerance as +/- 0.01mm and ceramic anilox from China
? Quick change the ink tray and pneumatic lock
? Quick lock and unload for plate roller without using tools
? NO Helical gears for plate roller and ceramic anilox ,etc
? A Auxiliary motor for anilox keeps running while the press stops to avoid drying the ink on the anilox surface especially when we use water base ink
? Surface hard aluminum guide roller
? Special structure of scraping blade ensure the cleaning of the surface of anilox
? Turn bar on the rail can move across the printing units
? monitor on the end of printing unit can inspect the registration of printing (BST)
? The Impression roller is also a Chiller Drum which in order to cool while printing ,that will not make the material shrink.
? 2 ton capacity Chiller with water circulation system
? Beside saving power ,the LED UV which this machine use also have Chiller connection
? Hot air drying with individual heaters and blowers for optimum usage (Optional)
? Delam -Relam Unit with enough roller fo proper control of web during Delam to print up to 4 colors on back of web (glue side)
? Pre-Registration system to set the printing cylinders to near registation before start of printing ,this is also why this machine can print with shrink film
? Auto-Registration system used by this machine because of plate roller and impression roller adopt its own independent servo motor
? Lateral position of printing unit fine turning by motor
Cold Stamping Device
? Cold Foil Unit on rail for movable across printing units
? Magnetic power and clutch control the Cold stamping device
? Pneumatic expanding shaft for unwinding and rewinding
Rotary die cutting
? 1 set of die cutting station
? total 3 rollers die cutting system for die cutting on the front or back side of the web by changing the anvil roller and magnetic roller
? A crane assembled near the die cutting station load and unload the magnetic cylinder
Matrix rewinding system
? Max. waste rewinding diameter 900mm
? Pneumatic expand air shaft 3”
? A servo driver controls the running of matrix rewinding
Rewinding device
? Maximum diameter 1050mm
? Air expanding shaft for 3 “
? Pneumatic cylinder for loading and unloading
